|
Encoders |
|
Click on any
picture to see a larger version Use your browser's "Back" function to return to this page |
 |
||
| Encoder enclosure is a frameless-glued constructed of 3/16" Oak veneer plywood | ||
 |
 |
|
| Removable panel provides access to encoder and wiring | Upper attachment point is a bearing mounted shaft inserted into trunion center pivot point and secured by a thumbscrew. Lower attachment shaft is friction secured by rubber grommet in rocker box side board. | |
 |
 |
|
| Altitude encoder is a U.S. Digital S2-2048-NT |
Azimuth
encoder is a U.S. Digital S2-2048-NT The Electronics section shows the encoder mounting attachment |
|